Along with the door color, we installed new lighting, added doormats to match the new color and accented the space with fresh plants.

Remove Hardware
Take the hardware — knobs, locks, knockers, etc. — off the door. If you’re not replacing those items, take the opportunity to give them a fresh polishing while the paint dries.

Cover Built-In Hardware
For hardware that can’t be removed — like a peephole — use painter’s tape to protect it from the paint.

Prep Surface for Paint

A fresh coat of paint will adhere better if the finish on the existing coat is knocked down a bit. Use a sanding block with fine-grit sandpaper to ready the surface for the new paint.

Remove Dust
Clean the door thoroughly with a rag to make sure there is no dust remaining on the surface.

Lay down a drop cloth to protect the ground and floor. Paint the door with an exterior-grade paint-and-primer-in-one. Leave the door slightly open as you paint to make sure you paint all the edges. Follow the manufacturer’s instructions for dry time. You may have to apply two coats to get full coverage. Start in the recessed areas with a brush then follow up with a roller on the flat areas.

Reattach Hardware
Replace the hardware. You may want to upgrade the knob, lock, kick plates, etc. to go with your vivid new door color.

Consider Painting Trim Too
With a new door color, you may find you need to paint the surrounding trim as well.

All rights reserved to the initial publisher for

Collected and published by Arms &McGregor International Realty® editorial team. Get in touch with us at [email protected]