When you step into your shower, you expect to emerge fresh and clean. But where does all that soapy body soil and dirt go? Much of it lands on the surfaces in your shower where it can attract mildew spores, bacteria, and even more grime. It’s time to get your shower really clean.

How Often to Clean Your Shower

A shower should be thoroughly cleaned weekly. However, if you do 60 seconds of maintenance each time you use the shower, you may be able to stretch the more extensive cleaning to two weeks. Shower curtains should be washed at least seasonally or more often as needed.

After every shower, use a squeegee or a bath towel to wipe down the shower walls and doors. Hang any shower tools like brushes or poofs to drip dry completely and clear the drain of any excessive hair.

This quick routine will keep ceramic tile, fiberglass, and stone shower enclosures looking their best and make the weekly cleaning much easier.

How to Clean Ceramic Tile Showers

The biggest challenge with ceramic tile showers is the grout, especially if it is left unsealed. The porous nature of the grout makes it the perfect growth medium for mildew spores.

What You Need

Supplies

  • Commercial shower and grout cleaner, or a homemade solution of 1/2 cup distilled white vinegar, 1/2 cup ammonia, and 3 quarts of hot water in a spray bottle
  • Chlorine bleach

Tools

  • Sponge or plastic mesh scrubber
  • Rubber gloves
  • Soft-bristled brush or old toothbrush
  • Squeegee
  1. Empty the ShowerThe shower will be much easier to clean if you remove all of the shampoo bottles, soap, razors, poofs, and toys. Combine products and recycle any empty bottles. Wipe down each item with a cloth dipped in hot water to remove any sticky messes. Remove any excessive hair from the drain.
  2. Ventilate and Wet the WallsTo help ventilate any fumes from cleaning supplies and to help the shower dry quickly, turn on the bathroom fan, open the bathroom door, and any windows. Use the shower head or a bucket to wet down the walls of the shower.
  3. Check for and Tackle MildewIf you see the presence of mildew on the grout, tackle it first before you move on the usual grime. Mix a solution of one part chlorine bleach and two parts water. While wearing rubber gloves, apply the solution to the mildewed grout with a sponge. Allow it to work for at least ten minutes and then scrub the grout with a soft-bristled brush or old toothbrush. Rinse the area well with hot water before moving to the next step.Never mix cleaning solutions like chlorine bleach and ammonia that can cause toxic fumes.
  4. Apply the Cleaner and WaitWhether you are using a commercial cleaner or a homemade solution, the key to easier cleaning is to give the product time to do its job. Spray the cleaner on the walls and floor of the shower and step away for at least five minutes—10 minutes is even better. The cleaner will begin to break apart the soap scum and soil and lessen your need to scrub.
  5. Scrub and RinseUse a sponge or plastic mesh scrubber to clean every section of the walls and floor. Never use a metal scrubber or hard-bristled brush because they can scratch the ceramic tile. Rinse the walls with clean water starting at the top and moving down.
  6. Squeegee Dry

Use a squeegee or old towels to remove any water from every surface. Skipping this step will result in water spots.

How to Clean Fiberglass Showers

Fiberglass shower enclosures are durable and easy to clean if you use the right tools and products. It is very important to never use anything that will scratch the fiberglass surface. When scratches occur, soil settles into the area making it harder to clean.

What You Need

Supplies

  • Distilled white vinegar
  • Baking soda or borax
  • Sponge or soft-bristled brush

Tools

  • Squeegee
  • Spray bottle
  • Sponge or soft-bristled brush
  1. Empty, Spritz, and SqueegeeAfter removing all of the bottles and accessories in the shower, spray the walls and floor with distilled white vinegar. Use a squeegee to wipe down the walls. The vinegar will cut through soap scum and any minerals in water spots.
  2. Scrub the Floor

Fiberglass floors are usually textured and need a bit of scrubbing to remove grime. Sprinkle the vinegar-dampened floor with baking soda or borax and allow it to work for at least 10 minutes. Use a sponge or soft-bristled brush to scrub away the dirt and rinse with plain water.

A Tip for Easier Cleaning Next Time

Once your fiberglass shower stall is sparkling clean, you can use fiberglass boat wax to provide a protective coating on the walls that allows water to run right off without spotting. However, never use the wax on the floor because it leaves a slippery finish.

How to Clean Stone Showers

If you have upgraded to marble, granite, or another natural stone as a finish, your shower must be cleaned a bit differently. By wiping down the walls after every use, you should only need to clean the stone once a week. Never use vinegar or harsh cleaners on natural stone because they can etch the surface.

What You Need

Supplies

  • Non-acid, ammonia-free stone cleaner or mild dishwashing soap
  • Warm water
  • Chlorine bleach
  • Stone sealer

Tools

  • Microfiber cloths
  • Spray bottle
  1. Empty and SpritzAfter emptying the shower of all loose items, spray down the walls with the commercial stone cleaner or a solution of one tablespoon dishwashing soap in one quart of warm water. Wipe down with a microfiber cloth. Use a bit of extra elbow grease on any water spots and soap scum. Rinse with clean water and dry with a microfiber cloth starting at the top of the shower and working to the bottom to avoid streaking.
  2. Treat Any MildewIf you spot any mildew on the stone or grout, mix a solution of one part chlorine bleach and one part water. While wearing rubber gloves, dip a sponge into the mixture and apply to the mildewed area. You can use a toothbrush to reach smaller grout areas. Let the solution work for fifteen minutes, scrub lightly with a soft-bristled brush, and then rinse away with plain water.
  3. Reseal

Following your installer’s guidelines, natural stone needs a barrier to prevent chemicals and water from penetrating into the stone. Sealing also prevents bacteria from settling into the natural crevices of the stone’s surface. After the stone is completely clean and dry, apply the stone sealer in small sections following product directions and buff with a soft cloth until all of the sealer is absorbed. This usually needs to be done at least twice a year.

How to Remove Tough Stains From Showers

There are a few stains that seem almost impossible to remove, but there is a way.

Rust Stains

If a shaving cream can left a rusty ring in the shower, you can try a paste of lemon juice and baking soda to remove the stain. However, if the stain is large or old, you will need to use a commercial cleaner that contains oxalic acid. Never use chlorine bleach on a rust stain. It may set it permanently onto the surface

Adhesive Residue

If you’ve had stickers on the shower floor or a removable accessory left some goo, use a bit of olive oil to saturate the area. Let it work for at least 15 minutes and then use a plastic scraper or the edge of a credit card to remove the goo. If a bit is left, some rubbing alcohol on a cotton ball or swab will remove the rest.

Source: The Spruce

Collected and published by Arms &McGregor International Realty® editorial team. Get in touch with us at [email protected]